Self-priming centrifugal pump
		FreFlow
		FRE - Bareshaft pumps with bearing bracket
		FRES - Pumps coupled to IEC standard motor
		FREF - Pumps coupled to flange motor on extended shaft
		FREM - Pumps coupled to petrol or diesel engine
		Excellent self-priming ability. No non-return valve required at suction.
		Modular design, with 4 bearing bracket groups. Parts interchangeability.
		Different drives possibilities.
		Oil bath for the mechanical seal. Lubricates the seal faces when priming, thus preventing the seal from running dry. & increase seal life. No crystallization between seal faces.
		Heavy duty bearings - dust tight & grease-lubricated. Applicable in dusty & dirty environment, and promotes longer mean-time between failures.
		Back pull-out design, thus easy maintenance
		C/w inspection & cleaning cover - easy maintenance & cleaning.
		General water transfer, supply & pressure-boosting
		Process & system engineering
		Waste water treatment plant
		Typical industries include chemical, petrochemical & pharmaceutical, oil, gas & electricity generation, paper, plastic, paint & metal finishing
		Marine & shipbuilding - bilge & ballast pumping, and fire fighting
		Suitable for handling contaminated, low viscosity liquids, as well liquids containing air or gas, for sumps and gullies and many other applications where a suction lift is required
		Clean or contaminated water - spring water, ditch water, infiltrated water, waste water, sea water, effluent…
		Hydrocarbons - petrol, kerosene, gas oil, parrafin, solvents
		Various acids, bases & other chemicals in industrial processes; also dye, soda, solutions, etc.
		Max. capacity
		350 m3/hr (50Hz)
		Max. head
		80 m (50Hz)
		Max. suction lift
		7 m
		Max. temperature
		95 oC
		Max. viscosity
		150 mPa.s
		Max. working pressure
		9 bar