Horizontal single stage end suction back pull-out centrifugal pump
		DMT
		The MONOFLO 'DIN-Master' series fully conforms to the pump standard DIN 24255 and covers all sizes nominated. This makes the range fully interchangeable with other brands of pump designed to this standard. For most sizes, the hydraulic performance actually exceeds the requirements of DIN 24255. All pumps are mounted on standardized bearing assemblies (Modules 25, 35 and 45) giving high parts interchangeability.
		The DIN-Master range has been extended to include 2 models with 200mm discharge and 2 models with 250mm discharge, catering for flows up to 300 citrus/sec. These sizes are mounted on a 4th standardized bearing assembly - Module 55.
		DIN-Master offers users many advantages over equivalent pumps, because the range incorporates a number of features that improve reliability & performance; while simplifying maintenance and spare parts inventory.
		Volute casings
		Manufactured in high-grade cast iron as standard with integral cast feet and vertical centerline discharge for automatic self-venting. Cast stainless steel casings are available as an option.
		Impellers
		Impellers are of the double shrouded type for higher efficiency, and are hydraulically balanced by rear balance vanes for impeller sizes below 300mm. Impellers above dia. 300mm, are achieved with double seal rings and balance holes.
		Robust bearing housing
			Incorporated with lifting eye to simplify removal of the rotating element during maintenance. 'Safe guards' are installed to prevent rotating shaft from human reach while in operation.
		Angular contact bearing design
		Upgraded "pump end" angular contact bearing design with regreaseable bearings, lip seals and water flinger to prevent ingress of dust and moisture. This significantly improves bearing life.
		Replaceable wear rings
		Wear rings are fitted to the volute as standard on all sizes. On models with double seal ring impellers, an additional wear ring is fitted in the backcover.
		"Back-pull-out" feature
		Feature allows the whole rotating element to be removed for maintenance, without disturbing pipework.
		General purpose water transfers pumping applications
		Pressure boosting & water supply
		Chilled & condenser water circulation in central air-conditioning systems
		Circulation in hot water systems
		Fire-fighting & fire sprinkler applications
		Swimming pool
		Machine cooling water circulation
		Irrigation
		Working pressure
		Maximum pressure rating to 16 bar. (Consult or refer to technical data for some models operating at 10 bar pressures)
		Capacity
		Capacity range up to maximum of 300 litres/sec (1080 m3/hr)
		Discharge pressure
		Discharge pressure range up to maximum of 150 metres (1500 kPa or 15 bar.)
		Operating temperature
		Up to 80°C with standard seals or packing. Liquids up to 105°C can be handled using special seals.
		Operating speed
		Maximum operating speed up to 3500 r.p.m.