Solid Handling/ Trash Self-priming Pumps
		X T & X U
SELF-PRIMING     The main feature of the XT & XU pumps are their ability to re-prime automatically in an open system without the need for a suction check valve.
QUICK & EASY MAINTENANCE     Routine maintenance & services are carried out quickly and easily with the use of regular tools, thus economizing time and labour. Cleaning & inspection without having to disconnect from pipework.
'SHIMLESS' EXTERNAL IMPELLER ADJUSTMENT     An exclusive system to externally adjust the impeller clearance without disassembling the pump. With a simple adjustment can optimize pump efficiency while extending the life of both impeller and wear plate.
		Waste water treatment plant
		Pulp & paper mill
		Food & beverage industry
		Steel mills
		Dewatering & flood-control
		Water & corrosives liquids handling
		Fluids with solids in suspension. Depending on pump models, can handle spherical solids up to 3" in diameter
		Industrial residues
		The rotor is dynamically and statically balanced in such a way to avoid vibration.
		Access to the filling of the priming chamber and draining bore for maintenance/cleaning. (without special tools)
		Rotor adjustment device related to the wear plate through thin threaded screws, against the casing, for keeping the set initial performance.
		Oil gauge and feeding threaded cap for verification/fueling of the bearings and mechanical seal lubricant.
		Volute casing with safety valve for pressure relief, in case of 'over-pressure' in the pump housing.
		The pump anti-friction radial bearings shall be lubricated by oil.
		Max Capacity:
		XT - 1,200 m3/hr (50Hz)
		XU - 280 m3/hr (50Hz)
		Max Head:
		XT - 43 m (50Hz)
		XU - 63 m (50Hz)
		Suction Lift: (Dependence on fluid pumped, pumping systems & NPSH)
		XT - 7.6 m (2,900 rpm)
		XU - 7.6 m (2,150 rpm)
		Max Solid Size
		XT - 76 mm (3")
		XU - 31.75 mm (1¼")