Cool-Tech 2K
Model 342000
 
 
 

The 342000 automates A/C service from start to finish. Using temperature probes and service hoses, it gives you a snapshot of the system's operation — which can be printed — then verifies the refrigerant type, recovers, recycles, evacuates and recharges. It even drains system oil once the job is finished.
 
 
  Electronic Scale
    Scale is mounted internally and includes built-in dampening of shock loads that occur when the unit is moved over gravel or an uneven floor.
     
     
  Microprocessor
    Controls functions; typical evacuation time and recharge amounts are pre-programmed as defaults but can be easily changed as needed; also signals when it's time to drain the oil container, change the filter-drier or source tank.
     
     
  Refrigerant Identifier
    Can save you thousands of dollars by warning you of contaminated or mixed refrigerants. Verifies 98% purity automatically at the beginning of each job.
     
     
  6 CFM Vacuum Pump
    Our Cool-Tech pump has the power to quickly evacuate the system prior to recharging.
     
     
  Heavy Duty Compressor
    Pulls from both the high and low sides for fastest recovery; initial pass through the filter-drier provides single pass recycling.
     
     
  Oil Injection
    Lets you replace system oil in seconds through the service hoses while the system is in a vacuum, with no other connections needed — just press a button.
     
     
  Refrigerant Identifier
    If contaminated refrigerant is detected, recovery is stopped to protect the unit and your shop's refrigerant supply.
     
     
  Built-in Printer
    Increases customer confidence, simplifies diagnosis and provides a record of service; just press "Print" to get a hard copy of pressures/ temperature, ambient conditions and other data.
     
     
  Plain Language Prompts
    Clearly tells the technician what needs to be done, right down to opening service couplers, or what function the unit is currently performing. Select English, French or Spanish; also select pounds or kilograms.
 
 
 

  Automatic Operation
  • Automatic Refrigerant Refill
• Automatic Refrigerant Identification
• Automatic Air Purge
• Automatic Oil Drain
• Automatic Clearing after every job
   
 
 
  Snapshot Mode
    Shows date/time, minimum low side and maximum high side pressures, ambient conditions, refrigerant type, duct temperature, and amount of refrigerant recovered. Results can be printed and shown to the customer.
     
     
  Recharging
    Transfers charge in minutes and is accurate, to ± one ounce.
     
     
  Air Purge
    Tests refrigerant before recovery and continuously monitors refrigerant in the internal vessel, automatically purges air as needed.
     
     
  Temperature Probes
    Two probes are included so there's no need for separate thermometers; you can check both front and back vents for adequate cooling.
     
     
  Built-in Diagnostics
    If any operating parameters are incorrect, unit alerts you so corrections can be made.
     
     
  Constant Refrigerant Refill
    Maintains 12 to 15 Ibs (5.44 to 6.8 kg) of refrigerant in the internal storage vessel so you'll never have to stop in the middle of a job to refill the tank; all it takes to change the source tank is one fast connection.
 
 
  Identification
    Active Flow Control protects the identifier from damaging liquid refrigerant, oil and other contaminants,
     
     
  Recovery
    Automatically restarts if the unit senses a rise in pressure
     
     
  Simple Maintenance
    Filter-drier life is monitored by the microprocessor; when promted, the unit automatically pumps down and evacuates the filter-drier before and after charging.
     
     
  Power Charge
    If the transfer of refrigeantr stalls for 30 seconds, the unit goes into an automatic Power Charge mode, building pressure to force the charge.
     
 
  No. 342000
    CoolTech-2K R-134a recovery, recycling, evacuation and recharging unit.
     
     
  342001F
    220V 50 Hz Programmed With English, German, French
     
     
  342001S
    220V 50 Hz Programmed With English, German, Spanish
     
     
  342001I
    220V 50 Hz Programmed With English, German, Italian
 
 
  34724
    Spin-On Recycling Filter-Drier
     
  16912
    Refrigerant Identification Filter
     
  34215
    Thermal Paper for Printer
     
  19655
    Flushing Kit Adapter
 
 
  Voltage
    115V 60 Hz
     
     
  Source Tank
    30 or 50 Ibs (23 kg) not included
     
     
  Operating Range
    50° to 120° F (11° to 49° C)
     
     
  Recycling Filter Drier
    43 cu. in (710cc) spin-on
     
     
  Scale Resolution
    1/100 Ib (.02 kg)
     
     
  Dimensions
    52" H x 33" W x 20" D
(132 cm x 83.8 cm x 50.8 cm)
     
     
  Weight
    202 Ibs (91.63 kg) without source tank